Home » Products » Calibration Device » Gas Meter Movement Error Test Bench » Gas Meter Movement Error Test Bench GES Type

loading

Gas Meter Movement Error Test Bench GES Type

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Gas meter movement error test bench GES type

1.General

This facility can be G1.6 ~ G4.0 three specifications diaphragm gas meter movement error curve automatic testing, test results through double way real-time display, graph and numerical software interface intuitive and clear, the operator test results can be references to gas meter movement linkage adjustment, control the error curve at a good level, improve the qualification rate of gas meter error detection of the whole table.The control device adopts venturi nozzle as the standard. Venturi nozzle has the following advantages: simple structure, stable performance, high accuracy, no moving parts, easy maintenance, etc. During operation, the detected gas passes through the tested movement, then enters the stagnation vessel, enters the buffer vessel through the sonic nozzle and the control valve, and finally is discharged into the atmosphere through the oil-free vacuum pump.When the flow through the sonic nozzle reaches a critical state, the mass flow rate of gas through the gage and nozzle will remain unchanged. Then the flow rate through the sonic nozzle during time T is determined. At the same time, the system receives the gas meter sampling signal, temperature, pressure and humidity sensor signal, and obtains the error of the tested gas meter through calculation.


2.Facility features

Ø Standard type: Adopts venturi sonic nozzle as the standard. According to the different flow points of the flow meter, the computer automatically selects the best nozzle closing;

Ø The system automatically detects the flow point errors of Qmax, 0.2Qmax and Qmin for the movement of the gas meter, and the test results are displayed on the computer screen in real time by means of both graph curves and numerical values.

Ø The detection efficiency of multi gas meter movement is significantly improved by parallel detection.

Ø The laser sampler is used to automatically sample the gas meter to realize dynamic measurement.

Ø The device adopts desktop computer for system operation and control, which is efficient and easy to operate.

Ø Computer control software: the whole system realizes automatic detection under the control of detection and testing software. The interface of the test software is clear, beautiful and easy to operate.

Ø All pneumatic components are Taiwan Yadecke and Japan SMC brand, sensors are internationally known brands.

3 .Technical index


Uncertainty

0.5% (K = 2)

Sonic nozzle coefficient

0.2% or less

Flow stability

< 0.1%

Flow range

0.04 ~ 6 m3 / h

Working method

Negative pressure

Meter to be tested

G1.6 ~ G4 gas meter movement

The number of one check list

4、6、8 pcs

Sampling mode of the checked table

Photoelectric sensor acquisition

Clamp table manner

Pneumatic clamp table

Pressure compensation

The standard

Temperature and humidity compensation

The standard

A material

Advanced industrial aluminum profiles

Unit power

0.5KW (220VAC), 4KW (380VAC, three-phase)

Communication methods

Rs232 serial port

Computer configuration

I37100/4g /1TB/ 19.5-inch LCD display























4 .Facility picture

Gas meter movement error test bench

Previous: 
Next: 

Relevant News

Related Products

QUICK LINKS

PRODUCT CATEGORY

CONTACT INFO

  +86-13685859225
   james@kinhil.com
 +86-574-87990913
 Floor 12A, Building B9, Smart Park, 99 Xiangyun Road North, Ningbo, 315100, China
Send Us A Message
Copyrights 2022 Ningbo Ningshing Kinhil Industrial Co., Ltd. Technology by Leadong. Sitemap.