Tips for using the Ultrasonic gas meter

An Ultrasonic gas meter is the basis for energy trade settlement. In recent years, electronic metering methods such as ultrasonic and thermal have been favored because they are more accurate and reliable, stable in operation and maintenance-free, and have brought an important change to the gas metering industry. Faced with the Smart ultrasonic gas meter, some users have raised some questions how do I replace the battery? How do I pay my bill? How do I communicate? What is the meaning of the code shown on the gas meter? Today, I will guide you into the world of Ultrasonic gas meters.

Here is the content list:

• The Ultrasonic gas meter's account top-up and usage switch.

• What are the precautions for using the Ultrasonic gas meter?

The Ultrasonic gas meter's account top-up and usage switch.

The Ultrasonic gas meter is a fully electronic meter using new ultrasonic technology, which has many advantages such as good long-term measurement stability, wide range ratio, small size, simple structure, no moving parts, etc. The measurement performance is at the international leading level. Generally, the Ultrasonic gas meter has a valve inside, which will automatically close once the gas meter's battery runs out of power or the user's account is in arrears so that the gas cannot be used. If the LCD shows "balance insufficient" or "unpaid", the account will need to be topped up and the customer can do so through the local gas company's top-up channels. Once the top-up is complete, the user can initiate remote communication between the back office and the gas meter by pressing the blue button briefly. When the LCD shows "-SUCC-", the communication is successful and the balance of the topped-up account is synchronized to the gas meter. For gas safety reasons, the valve is still closed at this moment, you need to open the valve by pressing the blue button on the Intelligent ultrasonic gas meter, the LCD will show "valve open" and you can use gas normally.

What are the precautions for using the Ultrasonic gas meter?

Firstly, the IoT ultrasonic gas meter should be installed in a place that is protected from wind, rain, and sun, well ventilated, with little vibration, no strong magnetic interference, no violent temperature changes, and easy to check and service. Secondly, a leak test must be carried out after installation to confirm that there is no leakage. Third, the air in the pipeline and flow meter must be evacuated before ignition. Fourthly, in case of leakage or inaccurate measurement, contact the local gas company in time and do not dismantle it without permission. Fifth, the Ultrasonic gas meter should be kept away from objects that are shielded against signals, such as motor equipment, steel, etc. Sixthly, it is recommended to use the same type of battery. Battery replacement should be done when there is good ventilation and no gas leakage. Seventh, the Ultrasonic gas meter should be kept away from ignition hazards caused by electrostatic charges during normal use, maintenance, and cleaning.

If you work with GPRS ultrasonic gas meters or want to know more about our company, you can communicate with us on our website at https://www.kinhilgas.com Our company adheres to the service tenet of "everything is customer first", implements integrity-based, customer-first service, and takes "excellent quality, multi-directional technical support, accurate delivery" as our business philosophy, with mutual benefit and common development as our goal. We are dedicated to providing quality Ultrasonic gas meter products and services to our friends.