Carbon monoxide detector with LCD indicator CO230/CO231/CO232
Product introduction
The product is wall mounted gas detector with high stability (hereinafter called detector). It is used for detecting leaking gas. Advanced semiconductor sensor is adopted to ensure high stability and long life. It is convenient for mounting. The product is suitable for the safety of residential house, villas, hotels, markets, boarding house ect.
CO-230
CARBON MONOXIDE DETECTOR WITH LCD INDICATOR
Operating Volt: DC 3*1.5 V replaceable battery
sensor life:7 years
Conform to EN50291
Sensor type: Electrochemical
Standby current: < 20uA
Alarm Current: < 75mA
Alarm volume: ≥85dB at 1m
Alarm concentration ：50ppm, 60-90 minutes;
100ppm, 10-40 minutes;
300ppm, within 3 minutes
Silence function: approx. 10 minutes
Fault Alarm function
Auto reset after alarm
Size:L125*W74*H37.5mm
The following parameters are optional:
Warm-up Time: about 180S
Alarm Indicator: red LED flash & beeper buzz
Operating Temperature: -10℃~+50℃
Environment Humidity: ≤95%RH (no condensation)
Installation Mode: wall mounted
Alarm Output: Sound & flash alarm
LCD display (optional)
CO-231
CARBON MONOXIDE DETECTOR WITH LCD INDICATOR
Operating Volt: DC 3*1.5 V replaceable battery
sensor life:7 years
Conform to EN50291
Sensor type: Electrochemical
Standby current: < 20uA
Alarm Current: <75mA
Alarm volume: ≥85dB at 1m
Alarm concentration ：50ppm, 60-90 minutes;
100ppm, 10-40 minutes;
300ppm, within 3 minutes
Silence function: approx. 10 minutes
Fault Alarm function
Auto reset after alarm
Size: L125*W73*H35mm
The following parameters are optional:
Warm-up Time: about 180S
Alarm Indicator: red LED flash & beeper buzz
Operating Temperature: -10℃~+50℃
Environment Humidity: ≤95%RH (no condensation)
Installation Mode: wall mounted
Alarm Output: Sound & flash alarm
LCD display (optional)
CO-232
CARBON MONOXIDE DETECTOR WITH LCD INDICATOR
Power supply:3V lithium battery (CR123A)
Battery life: 10 years
Sensor life: 7 years
Conform to EN50291
Sensor type: Electrochemical
Standby current:﹤20uA
Alarm current:﹤35mA
Alarm volume: ≥85dB at 1m
Alarm concentration ：50ppm, 60-90 minutes;
100ppm, 10-40 minutes;
300ppm, within 3 minutes
Silence function: approx. 10 minutes
Fault Alarm function
Auto reset after alarm
Size:Φ94*H35.1mm
The following parameters are optional:
Warm-up Time: about 180S
Alarm Indicator: red LED flash & beeper buzz
Operating Temperature: -10℃~+50℃
Environment Humidity: ≤95%RH (no condensation)
Installation Mode: wall mounted
Alarm Output: Sound & flash alarm
LCD display (optional)
Home Products Application About Us Resources News Contact Us